MS Physics

Enjoy Physics

Data Product

Board for a further two years confirmed at a Jubilee General Assembly has ETIM e.V. Early December celebrated its tenth anniversary. Around 50 VereinsmitgIieder from wholesale trade, industrial and service sectors came to the German electrical and electronics industry (ZVEI 🙂 to Frankfurt and looked together on a success story.) Not only that today virtually the entire electronic product data exchange between manufacturers and retailers in Germany on ETIM is based, with a simultaneous use in eight countries the classification model is also a model of European cooperation. Led is the ETIM e.V. has more than 80 members, that resulted in the subsequent annual membership meeting, also in the next two years by the current Board of Directors.

Dr. Horst Beckers, Managing Director of the Federal Association of the switchgear (VEG) e.V. in retirement, as well as long-time Treasurer of the ETIM e.V., stated in his review first, as ETIM has evolved from the mid of 1990s until today. He reported that this goes back to the basic ideas of the Dutch Association of craftsmen UNETO. Starting from his experience\”, so Dr. Beckers, but above all due to the constantly growing number of product data – between 1995 and 2002 alone grew these from 90,000 to 500,000 – also the German electrical launched its own classification system.\” As he pointed out, an initiative borne purely by trading page was his introduction, the Foundation of the Association and start funding it.

The initial work of the Association in his greeting Andreas BETTERMANN, er, Deputy Chairman of the specialist installation equipment and systems in the ZVEI compared with the work of Sisyphus, today show up but lasting success down the line. Christoph Bonn, Member of the Board of the Federal Association of the switchgear (VEG) e.V. and President of EUEW, stressed that the uniform product data structure generated about ETIM reduce expenses and costs for the entire three-stage trade and manufacturers with ETIM the competitive factor Data quality\”could exploit. The feared and announced tightening of competition due to classified product data remained so completely.

,
December 5, 2017 at 3:11 am Comments (0)

Directors ETIM

The importance of today’s lifting, said Bonn, the four letters of ETIM”stands for every” time in mind. Annual membership meeting at the annual Member meeting, joined in the celebrations, the Association members present confirmed the entire Board of Directors. Because only a member meeting per year is held, his term extends until June 2012. In his report to society 2009 old and new 1 Chairman, Franz Ernst, stressed that the harmonisation and cooperation efforts have well developed with eCL@ss, continuously increasing the number of members in Germany and international ETIM work is progressing successfully. With own organizations in the Switzerland and Poland the number of national associations or societies 2009 ascents on eight. Is to further increase the membership growth and also the awareness of ETIM, in 2010 Germany expanded the marketing and public relations.

About ETIM e.V. Founded in November 1999, the ETIM Germany e. V. is the central organization today, when it comes to the issues and dissemination of ETIM, the classification model of the electrical sector. Basic principle of ETIM (abbreviated for electronical information model) is to give each product of a certain class of product traded in the electrical sector. Within each of these product categories, different, verifiable properties such as material or power consumption are associated with the goods.

All important technical data are thus standardized by ETIM, so that its acquisition and use in trade absolutely works. ETIM is the guiding principle for the exchange of product and catalog data between the electronics and the electrical wholesale. And not only in Germany, but now in many other European countries. ETIM improves data exchange and communication between industry and trade. ETIM is today a significant relief and Cost reduction. Contact person for the press of Jurgen Ronsch, press & more GmbH, the capelin bushes 95 48155 Munster Tel: 0251 / 899 18 54 fax. 0251 / 899 11 12 mobile: 0177-591 968 1 email: URL: text and image can in the press center, or be downloaded under.

,
October 27, 2017 at 8:42 pm Comments (0)

German Association

Through the modernization as a result of the “EnEV” and the increased use of renewable energies such as photovoltaic systems, biomass heating and combined CO2 emissions at the Saxon housing cooperatives reduced 2009 to 25 percent. For all households, a reduction of CO2 emissions by 12 percent can be reached under the current allocation plan to the objective of the German Kyoto from 1990 to 2012. With a reduction of 25 percent meet the housing cooperatives in Saxony the Kyoto target by double”brings together Dr. Viehweger. The Saxon housing cooperatives are reliable partners of the local authorities. The federal countries program Stadtumbau OST”was successfully launched in Saxony. The housing stock by sponsored demolition actions to 80,000 apartments has decreased since 2000. However, can fool the reached about one not across.

The empty stand issue is still current. This year, we expect a second Empty stand wave”, as Dr. Viehweger. Budget start-ups go back due to geburtenschwachen born in the period. Moreover a declining housing demand by a significant excess of mortality and the still ongoing migration. Therefore, the urban redevelopment will remain the central challenge of urban development in the new Lander after 2010. First we need a continuation of programme urban redevelopment East by 2016, to decommissioning, to be able to continue including decommissioning of part of and the appreciation”, so the Board of Directors of the VSWG. The difficulty, however, is that in the first phase of urban restructuring primarily already vacant or to grow relatively quickly empty housing stock in the foreground stood.

Now it moves but continuously in the direction of partially restored or loaded with new debt stocks. Therefore an accompanying old debts this year for the success of the urban restructuring is imperative”asks Dr. Viehweger. Without this discharge of old debt is not Be housing associations able to participate as usual so intensively on the urban redevelopment. More focuses on the enforcement of affordable climate protection as well as the research and development of a with aging apartment in the framework of a project for the Federal Ministry of education and research in the year 2010, to set on the ageing population. The VSWG is the largest German Association for housing cooperatives. 236 housing cooperatives are organized in him. You manage 287.500 apartments and that 13 per cent of the total housing stock in the free State of Saxony. In case of enquiries, please contact: Association Saxon apartment genossenschaften e. V. Vivian Lange (Department public relations) Mobile: 0151 1203-7715 E-Mail:

,
October 25, 2017 at 2:02 pm Comments (0)

Evening Dresses

Evening dresses from the Walker shop top fashion and cheap the Wenz mail order company was founded in 1926, and this was known as the Weimar Republic. Headquarters is still Pforzheim. The company which was the sales volume with the two at that time large mail-order company competitors Neckermann and source lay right up before the beginning of the second world war. In the post-war period, Walker then became the fourth-largest shipping trade in West of Germany. A boom came in the 1950s and 1960s years. Of course, Walker jumped then also on the bandwagon and offered also a Web presence with the Walker shop. The Wenz shop offered the entire range of the range the consumer which can be ordered also as yet from the catalog.

While Walker has three focus issues in his Walker shop mode set, ambience and jewelry are separated in the main catalogue. They form a separate category in the Walker shop. The order in the Walker shop is very easy for the consumer here. Consumer it can serves as the range”as in the Main catalogue. Looking for an evening dress, for example, consumers in the Walker shop have a wide range.

Evening dresses in magnification and detail view under the microscope will be taken. For the case that is not sure of the consumers with regard to the size of the evening dress, so consumers with a Walker to Council may request. Staff are available here. If the gown then yet not should fit into the ordered size of consumers at the Walker shop has a 30-day return policy. Otherwise when the evening dress to your complete satisfaction is down, the customer pays the invoice within 14 days.

,
October 23, 2017 at 4:48 pm Comments (0)

SAP Customer

More transparency in the maintenance of the industrial services provider TECTRION provides its customers with the introduction of mobile maintenance at the CHEMPARK sites in Leverkusen, Dormagen and Krefeld-Uerdingen a new intelligent customer service, which is characterized by transparent maintenance processes and a complete documentation of the officially recognized that the customer always has access. Paper was yesterday. Today, increasingly mobile maintenance solutions provide greater efficiency and faster information flows within the framework of technical customer services. The staff responsible for the maintenance of plants by TECTRION have instant access to message summaries and histories by using mobile devices to create by the legislator prescribed order documentation directly to the object, i.e. on-site at SAP. Previous back to transmit handwritten notes in SAP accounts for Office activities, as well as the pressure of maintenance documents. The employee receives all the necessary information in real time directly on his PDA.

For example, errors are even faster and more efficient fixed a system with mobile access to the history of the plant. We use currently mobile maintenance MaterialScience in the part of the maintenance of air-conditioning and ventilation systems at Bayer”, so Gunter Rattay, responsible project manager mobile maintenance at TECTRION. First, there is the possibility to access dedicated customer access to the SAP system of the TECTRION. I have always”insights on the State of maintenance of our facilities as well as an overview of all maintenance notifications relating to my field of responsibility, explained Dr. Robert Meiers, head of engineering commissioned the PUD-(Dormagen), Bayer MaterialScience, his decision to use the new customer service of the TECTRION mobile maintenance. “And the best part is” Meier’s next, that eliminates the previous enormous administrative burden in the context of the maintenance protocols “. After the successful launch, the company plans to introduce mobile maintenance also for other trades. Editorial contact Tectrion GmbH Mandy Wagner Burlaga, Tel: + 49 (0) 214 30 43618 email: this message and image material for download.

,
October 12, 2017 at 11:41 am Comments (0)

Industrial Doors

Hormann builds also industrial doors in Germany also in the field of industrial doors offers the Hormann group a variety. Alone, the product range of sectional doors offers a unique product range. Sectional doors open vertically and therefore offer more space in front and behind the gate. In addition, the doors are in halls with glass roofs and glass domes very beneficial, because the fins equal vertical stack behind the crash and so very little space. Sectional doors of the Hormann group, you receive when a certified security and a top gate design that you can adjust to your wishes.

Also as in other products of the Hormann group, you can order the Sectionalindustrietore in various combinations. In the Sectionalindustrietoren you can choose between steel, a steel/wood combination or select from aluminium as a construction material. You have the possibility to adapt your outer appearance to the realities of your shed. The best and most popular building material here is aluminium, because this Kollisionsfrei is and never again must be deleted. So, you have long time no problems to take care of the maintenance of industrial doors. Also worth mentioning is that they can reach a high scratch resistance of Hormann sectional doors by a DURATEC-plastic glazing is applied. This ensures that the surface of the door is hardened and ensures that there is a high scratch resistance. The tripping threshold is a key advantage in industrial doors. At Hormann Industrial doors the tripping threshold is kept down by a very thin stainless steel threshold and allows easier travel along with objects, such as: a tool cart.

,
October 6, 2017 at 3:11 pm Comments (0)

© 2012-2018 MS Physics All Rights Reserved